Description
Range of Batteries Charged:
Individually or linked:
PAGlink PL96e Model 9303
PAGlink PL96T Model 9304
PAGlink PL150e Model 9308
PAGlink PL150T Model 9309
Individually:
PAG L90 Slim Model 9307V
PAG L95e/L96e Model 9310V
PAG L96T Model 9305V
Sony V-Mount Li-Ion
Battery Connectors:
2 x V-Mount.
Main Charge Programs:
Li-Ion Intelligent Parallel Charging program: maximum output 6A at 16.8V (100W approx.).
PAG ACS Ni-MH sequential charge program: output 3A.
PAGlink Charging:
Up to 8 PAGlink batteries per channel may be charged. Batteries can be in any state-of-charge. The most-discharged batteries will be given a higher charge priority. Fully charged batteries stop accepting charge automatically and independently of other batteries.
Recovery Charge Program:
Automatically recovers a Li-Ion battery after shut down.
Automatically detects very low battery voltage and initiates a low charge current until voltage has risen enough for normal charging.
Self Test Program:
Monitors the battery under charge, monitors the charger’s own functions, and shuts down to a safe condition should any tests fail.
Mains Input:
100V to 264V AC. Frequency 47-63Hz. Maximum consumption 220W.
Output Protection:
Protected against short circuit and excess battery voltage.
AC Mains Failure Protection:
Should mains failure occur during a charging program, or whilst the charger is connected, it will shut down to a safe condition.
User Interface:
The charge status of each PAGlink battery is indicated by its own display. The different stages of the charging process are indicated for each channel on the charger’s LCD screen. The charger is fully automatic in operation.
Operating Temperature Range:
0ºC to +40ºC (+32ºF to +104ºF).
Dimensions:
Height: 75mm (3”).
Width: 210mm (8.3”).
Length: 190mm (7.5”).
Weight:
1.4kg (3lbs).
Typical 96Wh Battery Charging Times:
1 battery: 2hrs 30mins
2 batteries: 3hrs
4 batteries: 6hrs
6 batteries: 9hrs 30mins
8 batteries: 11hrs 45mins
16 batteries: 24hrs
The times given are for fully-discharged to fully-charged 94Wh batteries equally distributed across both channels. 150Wh batteries will take 50% longer.
Camera Power Supply:
Suitable for powering cameras that can accept a 16.8V input.
Operation:
The camera power supply function is operated by pressing and holding the Camera PSU button on the charger’s front panel for 1 second. Charging is suspended whilst the power supply is in use.
Output:
16.8V DC. Maximum current 5.5A (90W).
Output Connector:
XLR4F connector (pin 1 neg. pin 4 pos).