GLENSOUND Virgil OB headphone amplifier with local analogue outputs
VIRGIL OB
€ 505.00
€ 626.20 (sis. alv.)
Virgil was the Roman poet who guided Dante through Hell and Purgatory, the Glensound Virgil OB is a clever little headphone amplifier for providing crystal clear audio into studio & broadcast headphones.
Packaged in a small & robust format and designed for outside broadcast & theatre applications wherever a headphone circuit or analogue output is required, the Virgil OB provides a simple interface between Dante / AES67 network audio systems and users headphones or other analogue audio equipment.
The Virgil OB encompasses our unique headphone amplifier circuit which automatically provides the correct output level to match the impedance of the attached headphones (to produce the same volume high impedance headphones require a much greater output level than low impedance).
Virgil OB receives 2 x audio circuits from a Dante / AES67 network and routes one to the left and the other to the right channel of the headphone amplifier. A front panel volume control allows the user to adjust the output volume of the headphones.
The 2 incoming audio circuits are also presented on a pair of balanced analogue audio XLRs on the rear of the unit. A switch on the side of the unit sets these 2 outputs to be post or pre fade of the front panel level control.
The Virgil OB is housed in a robust but lightweight aluminium casing that has been proven to withstand the rigours of life on the road. It also features a hardwearing beltclip allowing the unit to be quickly and securely attached to both people and infrastructure.
As well as being suitable for low & high impedance headphones our unique headphone amplifier circuit can be connected to both stereo headphones & mono earpieces, making the Virgil OB suitable for driving television presenters ear pieces.
The USB port is for firmware upgrades only and should not be used for power.
Löysitkö paremman hinnan? Lähetä meille sähköpostia (info@mediagear.ee) tai linkki tuotteeseen Euroopan unionin verkkokaupasta, niin teemme parhaamme tehdäksemme sinulle paremman tarjouksen!
GLENSOUND Virgil OB headphone amplifier with local analogue outputs
Virgil was the Roman poet who guided Dante through Hell and Purgatory, the Glensound Virgil OB is a clever little headphone amplifier for providing crystal clear audio into studio & broadcast headphones.
Packaged in a small & robust format and designed for outside broadcast & theatre applications wherever a headphone circuit or analogue output is required, the Virgil OB provides a simple interface between Dante / AES67 network audio systems and users headphones or other analogue audio equipment.
The Virgil OB encompasses our unique headphone amplifier circuit which automatically provides the correct output level to match the impedance of the attached headphones (to produce the same volume high impedance headphones require a much greater output level than low impedance).
Saatavuus: Saatavuus: OTA YHTEYTTÄ Vaikka toimitusaika on yleensä 1–2 viikkoa, ota meihin yhteyttä saadaksesi arvion toimitusajasta.
Asiantuntijoidemme hyväksymä
Huippulaatuinen tuote
Toimitus tai nouto
Virgil OB receives 2 x audio circuits from a Dante / AES67 network and routes one to the left and the other to the right channel of the headphone amplifier. A front panel volume control allows the user to adjust the output volume of the headphones.
The 2 incoming audio circuits are also presented on a pair of balanced analogue audio XLRs on the rear of the unit. A switch on the side of the unit sets these 2 outputs to be post or pre fade of the front panel level control.
The Virgil OB is housed in a robust but lightweight aluminium casing that has been proven to withstand the rigours of life on the road. It also features a hardwearing beltclip allowing the unit to be quickly and securely attached to both people and infrastructure.
As well as being suitable for low & high impedance headphones our unique headphone amplifier circuit can be connected to both stereo headphones & mono earpieces, making the Virgil OB suitable for driving television presenters ear pieces.
The USB port is for firmware upgrades only and should not be used for power.
Löysitkö paremman hinnan? Lähetä meille sähköpostia (info@mediagear.ee) tai linkki tuotteeseen Euroopan unionin verkkokaupasta, niin teemme parhaamme tehdäksemme sinulle paremman tarjouksen!
Samanlaisia tuotteita
HOLLYLAND Solidcom RJ45 to Dual XLR Audio Cable
HOLLYLAND Solidcom M1 Pro RRU Base Station
HOLLYLAND Solidcom M1 Pro-8 Double Ear Headsets
HOLLYLAND Solidcom M1 Pro-4 Double Ear Headsets
HOLLYLAND Solidcom M1 Pro-8 Single Ear Headsets
HOLLYLAND Solidcom M1 Pro-4 Single Ear Headsets
HOLLYLAND Solidcom BPK01 Tempered Glass Screen Protector
HOLLYLAND Solidcom 10-Pin to 4-Pin XLR Adapter Cable
HOLLYLAND Solidcom Electret ENC Dual-Ear Headset
HOLLYLAND Solidcom Electret ENC Single-Ear Headset
HOLLYLAND Solidcom BPK01 Beltpack Battery
HOLLYLAND Solidcom ANT01 PoE Antenna Power Adapter
HOLLYLAND Solidcom C1 Pro Carrying Case for 8 set kit
HOLLYLAND Solidcom C1 Pro-4S-DH – 4 Person Noise Cancelling Headset Intercom Double-Ear Version
HOLLYLAND Solidcom C1 Pro-Hub4S ENC 5-Person Full-Duplex Wireless Intercom System with Hub (1.9 GHz)
HOLLYLAND Syscom 1000T with 4 belt packs DEMO
HOLLYLAND Solidcom Air-Duct Earphone
HOLLYLAND Solidcom C1 Hard-shell Carrying Case
HOLLYLAND Solidcom BPK01 Beltpack
HOLLYLAND Solidcom BPK01 10-Slot Battery Charging Base
Äskettäin katsotut
SMALLRIG 2521 Nato Rail 48mm w/ ARRI Loc Screw
SMALLRIG 4878 Thumb Grip for FUJIFILM X-M5 Black
SMALLRIG 5333 Thumb Grip for FUJIFILM X half Charcoal Silver
SMALLRIG 4566 Thumb Grip for Fujifilm X100VI / X100V Silver
SMALLRIG 2501 Nato Rail 35mm w/ ARRI Loc Screw
SMALLRIG 3598 Single Rod Clamp 12/15mm For Panasonic GH6
GLENSOUND STYX audio mixer for Dante/AES67 audio networks