{"id":278429,"date":"2025-06-11T14:23:56","date_gmt":"2025-06-11T12:23:56","guid":{"rendered":"http:\/\/mediagear.ee\/product\/glensound-styx-audio-mixer-for-dante-aes67-audio-networks\/"},"modified":"2025-06-11T14:23:56","modified_gmt":"2025-06-11T12:23:56","slug":"glensound-styx-audio-mixer-for-dante-aes67-audio-networks","status":"publish","type":"product","link":"https:\/\/mediagear.ee\/fi\/tuote\/glensound-styx-audio-mixer-for-dante-aes67-audio-networks\/","title":{"rendered":"GLENSOUND STYX audio mixer for Dante\/AES67 audio networks"},"content":{"rendered":"

AoIP Inputs & Outputs<\/strong>
\n32 audio inputs and outputs to the network are provided. These are Dante\u00ae but can also be set to AES67. They are fixed at 48kHz and there is a fully redundant physical connection of two copper network circuits (Ethercon) and two SFP slots normally used for fibre).<\/p>\n

Line Level Analogue Inputs & Outputs<\/strong>
\nThere are 5 balanced line level analogue inputs and outputs presented on 2 x D25 plugs\u00a0wired to the AES59 (Tascam) standard.<\/p>\n

Microphone Inputs<\/strong>
\nThree low noise, large dynamic range, high quality microphone inputs are provided on rear\u00a0panel XLRs. Gain is set via the App, and 48 Volt phantom power can also be turned on\/ off\u00a0from the App. The output of the microphone amplifiers are routed in the DSP to individual\u00a0compressor\/ limiter circuits. Both compressed and uncompressed signals are presented as\u00a0inputs to the mixer. These inputs can also be set to receive a line level circuit.<\/p>\n

AES3 Inputs & Outputs<\/strong>
\nOn a rear panel 9 way D connector that is shared with the GPIO there is an AES3 input &\u00a0output circuit. Being AES3 this provides 2 audio channels in & out.<\/p>\n

Headphone Outputs
\n<\/strong>For monitoring purposes three stereo headphone outputs are provided. These utilise our\u00a0unique amplifier circuit suitable for both low and high impedance headphones.<\/p>\n

Line Up Tone<\/strong>
\nThe internal DSP provides two fixed rate oscillators, one at 1kHz and the other 1\/5th\u00a0Octave lower at 629Hz. The outputs of these oscillators are presented as two inputs to the\u00a0mixer.<\/p>\n

Shaft Encoders
\n<\/strong>The 24 front panel shaft encoders are rotary level controls. When one is rotated a row of\u00a0LEDs above the front panel PPM illuminate to indicate the current position (i.e. how far up\u00a0(or down) the control is currently set). These shaft encoders can also pan the associated circuits, achieved by pushing them in while\u00a0rotating.<\/p>\n

The mixer cross point circuits that these controls adjust can be configured in\u00a0GlenController. One shaft encoder can be set to control many cross points, however\u00a0individual cross points can only ever be controlled by one shaft encoder.<\/p>\n

Switches
\n<\/strong>There are 24 illuminated push switches on the front panel. These can be set to turn any or\u00a0multiple mixer cross points on\/ off. They can also be set to route outputs to the\u00a0headphones and meter circuits. The interaction between switches is fully configurable.<\/p>\n","protected":false},"excerpt":{"rendered":"

STYX (pronounced sticks) is a hugely versatile configurable 47 x 45 mixer\/utility device with 32 x 32 network audio inputs & outputs with the added benefit of 5 x 5 analogue line level circuits, 2 x 2 AES3 circuits, 3(+3) x microphone\/line inputs, 2 line up tone inputs & 3 stereo headphone outputs.\u00a0<\/p>\n

The front panel features 24 x assignable rotary encoders and 24 x assignable illuminated\u00a0switches, plus a mono assignable PPM and LED graph to indicate positioning of the\u00a0encoders when they are used.<\/p>\n

The real power of STYX is its Windows 10 application which in real time can adjust any of\u00a0the 2115 mixer cross point levels, provides many setup options, and importantly, allows presets to be stored and recalled.<\/p>\n

Reliability is key: STYX has multiple redundant power supply sources and redundant network interfaces.<\/p>\n

Features:<\/strong><\/p>\n