STYX (pronounced sticks) is a hugely versatile configurable 47 x 45 mixer/utility device with 32 x 32 network audio inputs & outputs with the added benefit of 5 x 5 analogue line level circuits, 2 x 2 AES3 circuits, 3(+3) x microphone/line inputs, 2 line up tone inputs & 3 stereo headphone outputs.ย
The front panel features 24 x assignable rotary encoders and 24 x assignable illuminatedย switches, plus a mono assignable PPM and LED graph to indicate positioning of theย encoders when they are used.
The real power of STYX is its Windows 10 application which in real time can adjust any ofย the 2115 mixer cross point levels, provides many setup options, and importantly, allows presets to be stored and recalled.
Reliability is key: STYX has multiple redundant power supply sources and redundant network interfaces.
Features:
- Danteยฎ network audio interface + AES67
- 47 x 45 Non-blocking mixer
- Windows 10 remote control app
- 32 Bi-directional AoIP channels
- All 2115 mixer points have level controls
- 24 assignable switches & encoders
Avaleht ยป Shop ยป AUDIO ยป Commentary systems ยป GLENSOUND STYX audio mixer for Dante/AES67 audio networks
GLENSOUND STYX audio mixer for Dante/AES67 audio networks
€ 3100.00 € 3782.00 (incl. VAT)
STYX (pronounced sticks) is a hugely versatile configurable 47 x 45 mixer/utility device with 32 x 32 network audio inputs & outputs with the added benefit of 5 x 5 analogue line level circuits, 2 x 2 AES3 circuits, 3(+3) x microphone/line inputs, 2 line up tone inputs & 3 stereo headphone outputs.ย
The front panel features 24 x assignable rotary encoders and 24 x assignable illuminatedย switches, plus a mono assignable PPM and LED graph to indicate positioning of theย encoders when they are used.
The real power of STYX is its Windows 10 application which in real time can adjust any ofย the 2115 mixer cross point levels, provides many setup options, and importantly, allows presets to be stored and recalled.
Reliability is key: STYX has multiple redundant power supply sources and redundant network interfaces.
Features:
AoIP Inputs & Outputs
32 audio inputs and outputs to the network are provided. These are Danteยฎ but can also be set to AES67. They are fixed at 48kHz and there is a fully redundant physical connection of two copper network circuits (Ethercon) and two SFP slots normally used for fibre).
Line Level Analogue Inputs & Outputs
There are 5 balanced line level analogue inputs and outputs presented on 2 x D25 plugsย wired to the AES59 (Tascam) standard.
Microphone Inputs
Three low noise, large dynamic range, high quality microphone inputs are provided on rearย panel XLRs. Gain is set via the App, and 48 Volt phantom power can also be turned on/ offย from the App. The output of the microphone amplifiers are routed in the DSP to individualย compressor/ limiter circuits. Both compressed and uncompressed signals are presented asย inputs to the mixer. These inputs can also be set to receive a line level circuit.
AES3 Inputs & Outputs
On a rear panel 9 way D connector that is shared with the GPIO there is an AES3 input &ย output circuit. Being AES3 this provides 2 audio channels in & out.
Headphone Outputs
For monitoring purposes three stereo headphone outputs are provided. These utilise ourย unique amplifier circuit suitable for both low and high impedance headphones.
Line Up Tone
The internal DSP provides two fixed rate oscillators, one at 1kHz and the other 1/5thย Octave lower at 629Hz. The outputs of these oscillators are presented as two inputs to theย mixer.
Shaft Encoders
The 24 front panel shaft encoders are rotary level controls. When one is rotated a row ofย LEDs above the front panel PPM illuminate to indicate the current position (i.e. how far upย (or down) the control is currently set). These shaft encoders can also pan the associated circuits, achieved by pushing them in whileย rotating.
The mixer cross point circuits that these controls adjust can be configured inย GlenController. One shaft encoder can be set to control many cross points, howeverย individual cross points can only ever be controlled by one shaft encoder.
Switches
There are 24 illuminated push switches on the front panel. These can be set to turn any orย multiple mixer cross points on/ off. They can also be set to route outputs to theย headphones and meter circuits. The interaction between switches is fully configurable.
AoIP Inputs & Outputs
32 audio inputs and outputs to the network are provided. These are Danteยฎ but can also be set to AES67. They are fixed at 48kHz and there is a fully redundant physical connection of two copper network circuits (Ethercon) and two SFP slots normally used for fibre).
Line Level Analogue Inputs & Outputs
There are 5 balanced line level analogue inputs and outputs presented on 2 x D25 plugsย wired to the AES59 (Tascam) standard.
Microphone Inputs
Three low noise, large dynamic range, high quality microphone inputs are provided on rearย panel XLRs. Gain is set via the App, and 48 Volt phantom power can also be turned on/ offย from the App. The output of the microphone amplifiers are routed in the DSP to individualย compressor/ limiter circuits. Both compressed and uncompressed signals are presented asย inputs to the mixer. These inputs can also be set to receive a line level circuit.
AES3 Inputs & Outputs
On a rear panel 9 way D connector that is shared with the GPIO there is an AES3 input &ย output circuit. Being AES3 this provides 2 audio channels in & out.
Headphone Outputs
For monitoring purposes three stereo headphone outputs are provided. These utilise ourย unique amplifier circuit suitable for both low and high impedance headphones.
Line Up Tone
The internal DSP provides two fixed rate oscillators, one at 1kHz and the other 1/5thย Octave lower at 629Hz. The outputs of these oscillators are presented as two inputs to theย mixer.
Shaft Encoders
The 24 front panel shaft encoders are rotary level controls. When one is rotated a row ofย LEDs above the front panel PPM illuminate to indicate the current position (i.e. how far upย (or down) the control is currently set). These shaft encoders can also pan the associated circuits, achieved by pushing them in whileย rotating.
The mixer cross point circuits that these controls adjust can be configured inย GlenController. One shaft encoder can be set to control many cross points, howeverย individual cross points can only ever be controlled by one shaft encoder.
Switches
There are 24 illuminated push switches on the front panel. These can be set to turn any orย multiple mixer cross points on/ off. They can also be set to route outputs to theย headphones and meter circuits. The interaction between switches is fully configurable.
Reviews
Feedback from customers
Related products
HOLLYLAND Solidcom C1 Pro Wireless Master Headset
GLENSOUND DARK1616M network audio interface
GLENSOUND Virgil OB headphone amplifier with local analogue outputs
GLENSOUND Lodge rack mount mobile phone hybrid
GLENSOUND Nomad portable mobile phone hybrid
HOLLYLAND Solidcom C1 Pro wireless intercom system
ICOM IC-F1100DT (VHF) / IC-F2100DT (UHF) digital / analog handheld radio
HOLLYLAND Solidcom C1 Battery replacement 1 pcs
HOLLYLAND Solidcom C1 Wireless Single-Ear Remote Headset (with 2 batteries)
HOLLYLAND Solidcom C1 Wireless Single-Ear Master Headset (with 2 batteries)
HOLLYLAND Solidcom C1 Headset On-Ear Earmuff 2 pcs
HOLLYLAND Solidcom C1 3.5mm Single-Ear Wired Headset for HUB
HOLLYLAND Solidcom C1 Carry Case for 4-Person & 6-Person Systems
HOLLYLAND Solidcom C1 Carry Case for 2-Person & 3-Person Systems
HOLLYLAND Solidcom C1 HUB Base
HOLLYLAND Solidcom Dynamic single ear headset
HOLLYLAND Solidcom C1 full duplex wireless intercom system
HOLLYLAND Lemo Dynamic Double-sided Headset
HOLLYLAND Wireless Intercom Panel Antenna
HOLLYLAND USB-C to RJ45 adapter
HOLLYLAND Solidcom M1 intercom system with 4 belt packs
HOLLYLAND 3.5mm dynamic double-sided headset
HOLLYLAND Mars T1000 full duplex wireless intercom system
HOLLYLAND Syscom 1000T full duplex intercom system with tally (4+1)
Recently viewed